Right angle 1/4'' 2 pole timbre plug
The characteristic sound of a guitar is influenced to a certain extend by the used instrument cable. Particularly the natural electrical property of guitar cables cause the characteristic cable tone. Neutrik’s new timbrePLUG provides the possibility to change the timbre of your guitar sound from neutral, clear sound to warm characteristics in 4 steps by turning a knob on the plug. A wide range of new sounds opens.
As brilliant as simple.
Product | |
Connector Type | Plug |
Gender | male |
Electrical | |
Contact resistance | depends on mating connector mΩ |
Dielectric strength | 1 kVdc |
Insulation resistance | > 2 GΩ (initial) |
Insulation resistance | ≥ 1 GΩ (after damp heat test) |
Rated current per contact | depends on mating connector A |
Rated voltage | 50 V |
Mechanical | |
Cable O.D. | 4 - 7 mm |
Lifetime | > 1000 mating cycles |
Wire size | 1 mm² |
Wire size | 18 AWG |
Wiring | Solder contacts |
RW / Straight | Yes |
Material | |
Bushing | Polyacetal (POM) + PU |
Contact plating | 2 µm Ni (Su) |
Contacts | Brass (CuZn39Pb3) |
Insert | Polyamide (PA 6.6 30 % GR) |
Shell | Zinc diecast (ZnAl4Cu1) |
Shell plating | Nickel |
Strain relief | Polyacetal (POM) |